Commercial Electrical
Commercial electrical in Humboldt County: service agreements, repairs, 3-phase service, UPS & server room power. Off-hours work available. C-10 licensed.
Learn moreFrom recessed lighting in a Eureka kitchen to parking-lot pole lighting for a commercial property, Greenbelt Electrical installs and upgrades lighting across Humboldt County — done cleanly, to code, and designed for how the space is actually used.
Good lighting starts with placement. We help you plan spacing and switching so rooms and parking areas are lit evenly — not just brighter.
Lighting retrofits often mean new circuits and load changes. As a C-10 licensed contractor (#1053285), we size circuits correctly and pull permits where required.
We install and repair light poles ourselves — including the excavation and bases — so you aren’t coordinating multiple trades for one pole.
Homeowners, businesses, and property managers get the same owner-led crew and the same standard of finish.
We install and repair light poles for commercial lots, HOAs, schools, and municipalities across Humboldt County. Whether it’s a new pole or a damaged or flickering pole light, we handle the excavation, bases, poles, wiring, and fixtures.
Here’s why most retrofits today move to LED.
| Factor | LED | Older fluorescent, HID, or incandescent |
|---|---|---|
| Energy use | Far less energy for the same light | Higher energy use |
| Lifespan | Much longer rated life; fewer replacements | Frequent lamp and ballast replacements |
| Light quality | Instant-on, many color temperatures, dimmable options | Warm-up time on HID; flicker and hum on aging fluorescents |
| Pole maintenance | Fewer trips up the pole | Regular relamping at height |
Results depend on the fixtures chosen and how they’re used. We recommend fixtures based on your space.
Lighting projects range from a single fixture to a full parking lot. Cost depends on these factors.
A few fixtures in one room is a very different job from a whole floor or a parking lot.
Reusing existing circuits keeps the job simpler. New circuits, switching, or controls add labor.
Recessed lighting in an existing ceiling depends on joist direction, insulation, and attic access.
New poles need excavation and bases. Repairs and LED swaps on existing poles are smaller jobs.
Dimmers, occupancy sensors, photocells, and timers add parts but can lower energy use.
Some commercial lighting alterations trigger California Title 24 energy code requirements, such as lighting controls.
Every job is seen in person and quoted in writing before work starts. Call (707) 476-3720 or request a free estimate.
We review your space, existing wiring, and what you want the lighting to do — task, ambient, security, or curb appeal.
Fixture and layout recommendations with a clear written price before any work begins.
Fixtures, switches, and circuits installed to code, with surfaces protected and penetrations sealed.
We aim, test, and walk the lighting with you — and leave the space clean.
Long, gray winters on the North Coast make good lighting matter. Whether it’s a Eureka kitchen or a commercial parking lot, we plan layouts for even light, not just more fixtures.
For outdoor and pole lighting, coastal moisture and salt air are hard on fixtures, bases, and wiring. We install and repair poles ourselves, including the excavation and bases, and swap existing pole fixtures to LED.
We work with homeowners, businesses, commercial lots, HOAs, schools, and municipalities across the county.
Based in Eureka and serving the whole county — including the surrounding North Coast communities.
Not sure if you're in our area? Call (707) 476-3720and we'll tell you straight.
Updated
Yes. We install new poles — including excavation and bases — repair existing ones, and swap fixtures to LED on existing poles. We work with commercial lots, HOAs, schools, and municipalities.
In most homes, yes. Existing construction work takes more care than new builds, but we retrofit recessed lighting regularly and keep patch work minimal.
Often not — many retrofits reuse existing circuits. Where the load or wiring condition requires it, we’ll tell you in the written quote before any work starts.
Simple fixture swaps usually do not; new circuits and larger retrofits typically do. We handle permits and inspection coordination where required.
Yes — tell us what you have and we’ll source matching fixtures, depending on availability.
It depends on what you’re replacing and how many hours the lights run. LEDs generally use much less energy than incandescent, fluorescent, or HID fixtures and need fewer replacements. We can help you compare options when we quote.
On older HID pole lights, cycling on and off is often a sign of a failing lamp or ballast. A bad photocell, wiring problems, or water in the fixture can also cause it. We troubleshoot pole lights and can convert them to LED.
Slim LED fixtures are a common choice for retrofits because they fit existing ceilings with minimal patching. Where there’s insulation above, California energy code calls for recessed fixtures rated for insulation contact and airtight construction.
Often, yes. California’s Title 24 energy code can require lighting controls such as occupancy sensors, daylight controls, or dimming on commercial lighting alterations. We’ll tell you if your project triggers them.
Yes. We install exterior, security, and landscape-rated lighting, with motion sensors, photocells, or timers if you want them.
Commercial electrical in Humboldt County: service agreements, repairs, 3-phase service, UPS & server room power. Off-hours work available. C-10 licensed.
Learn moreElectrical panel upgrades in Eureka & Humboldt County. We handle PG&E scheduling, permits, and inspection. C-10 licensed electrician. Free estimates.
Learn moreFull electrical for new construction in Eureka & Humboldt County. Rough-in to finish for homes, ADUs & shops by a C-10 licensed contractor. Free estimates.
Learn moreCall, text, or send a few details and Ross or a member of the crew will get right back to you — usually the same business day.
Trouble with the form? Open it in a new tab or call (707) 476-3720.